Home | Contact Us | History
image displayed if flash reader not installed
[ Clips ] Screws ] Dowels ] Tools & Gauges ]

CLIP STYLES

 

Single Clip

Double Clip

Anti-Rotational Clip

                 Mod-eez products are covered by many US and international patents.

Non-Locking: Friction prevents the joint from disengaging.   
Semi-Locking: Friction and a narrowing runway prevent the joint from disengaging. Requires more force to disengage than Non-Locking Clip. 
Locking: A locking tab prevents the joint from disengaging. Locking tab must be turned with a flat blade screwdriver for disengagement.
Pass-Thru: Used in grooved edge with another clip as an alternative to pockets with windows.
 

Anti-Rotational Clip

The Anti-Rotational Clip was designed to go into a rail with an open-ended pocket as narrow as x 2 using 2000 Series Clips and x 2 using 5000 Series Clips and provide a tight joint over a wide range of pocket depths i.e. tolerance of .030 and .020.    
Locking:  A locking tab prevents the joint from disengaging. Locking tab must be turned with a flat blade screwdriver for disengagement.

Non-Locking:  Friction prevents the joint from disengaging.

Pass-Thru: Used in grooved edge with another clip as an alternative to pockets with windows.

Click Here to go to the Identification and Specification page where you can see all of our clips with their part numbers, descriptions, and pocket specifications.