Home | Contact Us | History | Site Map

Modular Systems, Inc. is an ISO 9001:2008 certified company


Home ] Up ] Accu-Systems ] Dodds Mortis Bore Machine ] [ DTI Machines ] Manual Pocket ] Mini-Pocket ] Horizontal Router ] Weeke CNC ] Used ]

DTI Machines:




DTI “Design Tool Inc.”

1607 Norfolk Place SW

Conover, NC 28613

PHONE: 800-948-1038

FAX: 828-328-4127


Mod-eez® Clip Inserting Machine

Inserts two clips with two screws each for positions.
Panel width can vary from 3” to 50” each 

Custom Designed Multi-Spindle Fixtured Systems can be custom designed and supplied with componentry or as a turnkey system. We also design XYZ, computerized, and PLC controlled units. System can include foot switch, 2-way anti-tie downs or light curtains for added safety. We have drastically reduced the cost of these types of machines with our patented multi-feed system, which enables us to feed multi-spindle drivers from one hopper. This system also reduces maintenance, required air volume, and floor space usage.



DTI 5000 Automatic Feed Shoulder Screw Screwdriver

Feeds Mod-eez® Shoulder Screws



Ease Of Operation

Our unique barrel design allows the DTI 5000 to be much smaller in size and lighter in weight in comparison to other machines. The patented barrel design allows flexibility to position the micro switch and entrance tube anywhere on the barrel and sleeve assembly. This design enables the DTI 5000 to be used in more applications than other units on the market today. 


The simplicity of the patented feed mechanism makes this machine less likely to experience mechanical failure. The twist-lock feed cover permits fast access to the feed mechanism allowing it to be disassembled and reassembled in seconds without the use of tools. This simple design, in conjunction with the twist-lock feed cover, exposes the screws moving through the feed mechanism allowing quick visible detection and accessibility should a jam occur because of a foreign object or a defective screw. The automatic timed shut off feature on the DTI 5000 base unit reduces wear on the feeder bowl and makes the unit more efficient. The machine automatically shuts off if unit is not cycled for 7-8 seconds and restarts when the operator drives another screw. 

Design & Service

The Design Tool team has a combined 80 years of experience in the design and manufacturing of automatic assembly equipment and vast AutoCAD knowledge. Each DTI 5000 is designed specifically to the customer’s fastener and application. The DTI 5000 can be designed with hand held, pistol grip, or straight type air screwdrivers with various rpm’s and torque, with reverse capabilities.